ConCar PU Timing Belts Open Ended / Jointed

There are a large number of applications in which ConCar PU goods cut by length can be used - open or welded . PU goods cut by length are considered one of the most precise, extremely resilient timing belts, which are used for example in synchronous conveyor systems, for controlling linear motion or in drive systems. They are suitable for welding on carrier profiles and for a very wide range of coatings. Beyond the standard range, there are a large number of designs, such as timing belts with polyamide fabric on the rear or cog side (PAR or PAZ), which ConCar can in some cases offer directly from stock. Other special designs and special widths are available on request.
The potential areas of use of PU goods cut by length or welded PU timing belts:
- Wood processing machines
- Baggage conveyance systems
- Packaging machines
- door and gate drives
- Textile machines
- Fitness appliances
- Linear applications of all kinds, etc.
Product information | |
---|---|
Brand | ConCar |
Material | polyurethane (PU) |
Cord | steel; also possible with Kevlar and stainless steel |
Design | Standard, possible with POC* and / or POR**, special designs available on request! |
Roll sizes | 50 or 100 m, cutting to size: +10 % added charge |
*Poyamide on the cog side, **polyamide on the rear side
Overview of PU goods cut by length

Profiles | ||||||||
---|---|---|---|---|---|---|---|---|
T2,5 | T5 | T10 | T20 | AT5 | AT10 | ATL10* | AT20 | ATL20* |
Possible standard widths (depending on partition): 10 mm, 16 mm, 25 mm, 32 mm, 50 mm, 100 mm, 150 mm
*ATL = reinforced cord
Profiles | |||
---|---|---|---|
XL (=5,08 mm) | L (9,525 mm) | H (12,7 mm) | XH (22,225 mm) |
Possible standard widths (depending on partition): 3/8" (=9.53 mm), 1/2" (=12.7 mm), 3/4" (=19.05 mm), 1" (=25.4 mm), 1 1/2" (=38.1 mm), 2" (=50.8 mm) , 3" (=76.2 mm), 4" (=101.6 mm), 6" (=152.4mm)